Make your own pterosaur

pterobig

Download the PDF below, print the three pages, cut out the parts, paste them together, and you will have your own Guidraco.

cutout

For best results use thick 180 g/m2 paper (122 lb). Take some time to study the parts. Cut it out carefully. Fold as indicated and paste one tab at a time. It’s not so complicated but it does require some concentration. The pterosaur will have a wingspan of 50cm (20 in).

If you wish, you can try this smaller one, which fits in one page:

Guidraco_model_en

It’s a bit harder to cut and paste. The wingspan is 30 cm (12 in) wide. The image above links to a JPG, which can be scaled to fit in larger pages. It is also available as PDF in borderless A4 format.

twopteros

Advertisements

Leave a comment

Filed under Pterosaur #1: Guidraco

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s